- Yagi Antenna 301111 in Wilson Electronics White Box - Mounting hardware - Warranty information
The Wilson Cellular Yagi Antenna`s main benefit over our other antennas is its ability to focus its signal in one direction. This antenna is designed for use on stationary objects such as buildings. If this antenna is not aimed correctly it will lose its effectiveness.
This higher gain antenna improves transmit and receive signals for 806-894 MHz band used by Verizon, Alltel, US Cellular, Cellular One, Cingular, Nextel, SouthernLINC, Bell Canada, Telus, Mike and all other Cellular and iDEN carriers.
Wilson Yagi Cellular Antennas are very effective at increasing your cell phone`s signal strength in rural areas. The Yagi is a directional antenna and should be mounted above tree lines and aimed directly at your service providers nearest cell tower. It is a single band (806-894 MHz) cellular antenna designed for fixed installations.
The Wilson Yagi Cellular Antenna is carefully designed to minimize loss and maximize gain on the 800 MHz band. Wilson`s innovative design results in high efficiency with low losses and will get the most signal to and from your cellular phone.
The antenna includes no cable. For a short run of 20` you can use our 20` RG-58 coax extension which has the appropriate connections for the Yagi. Please note that our other RG-58 cables can not be directly connected to the Yagi antenna.
For longer runs, we suggest using one of the below lengths of Ultra Low Loss 9913 Cable. This cable is fairly stiff so if you plan on connecting the Yagi directly to your phone with an antenna adapter we suggest you also include an 5` RG-58 extension. The below cables may also be connected together using the N-Female to N-Female barrel connector.
The primary difference between RG-58 and 9913 is the dB signal loss. RG-58 loses approximately 12dB/100` while 9913 loses about 4dB/100` (which is a big difference).