- Amplifier - Steath Antenna (velcro connection) - DC Power Supply
Product Description
A cellphone using our amplifier is safer and will use less battery power because the phone thinks it`s much closer to a cell site than it actually is. Phones vary their power output based on their proximity to cell sites. Therefore, your phone transmits less power - resulting in safer use and longer battery life.
Product Specification
In-Vehicle 40 dB gain
Frequency Range: AMPS 824-894/1850-1990 MHz
Use: In vehicle
Gain: 40 dB Models
Noise Figure: 3dB Nominal
Power Consumption: 12v, .5-1.5(subject to uplink power)
Connecter: FME Male 50 ohms
Weight: 1.5 pounds or 0.7 kg
Advanced Electronics Receive & Transmit Better Than Your cellphone using the Stealth Antenna as your inside antenna.
Wireless Operation - No Physical Connection to Cellphone needed. The inside antenna will amplify the frequencies in your vehicle. Alternately, you may connect the amplifier to your phone via a Direct Connect Antenna RF Coupler Adapter.
Allows Multiple Phones to be Used Simultaneously
Designed for All Cellular Systems Including AMPS, CDMA, EDGE, GPRS, GSM, and TDMA
Power Control Logic Ensures Maximum Gainis Within Cellular Standards
Maximum 3 Watts Output Power (cell site controled)
Overload Protection Circuit- Protects Cell from Overload
Automatic Reset if overload occurs
Significantly Increases Your Cellphone`s Range on Send & Receive
Safer Than Using Your Cellphone Without An Amplifier**
Extends the Life of Your Cellphone`s Battery***
Passes TIA/EIA-98-A Transmit Tests for Evaluating CDMA Cellular Phones
** The Wilson Cellular Amplifier/Repeater has a better receiver than what`s in your cellphone. Its advanced electronics are very sensitive and able to receive small signals which would go undetected by most cellphones. It also has a better transmitter with double the power of your cellphone. This allows your voice to be heard by distant cell sites, increasing coverage up to 50 miles or more.
*** The signal received and transmitted through the system that links Wilson Cellular Antenna, to the amplifier. You may also need Extension Cables to complete the installation. We carry LMR400, 9913 and RG58 extension cables.
Only the Amplifier, Steath Antenna (velcro connection) and DC Power Supply will be included in this package. You need to purchase the outside antenna. These antennas are available in our web-site along with the AC/DC Power Supply which is optional.
David 9/23/2009 The system does work just fine however; my only question is why this product is called a wireless product when there are so many wires such as Antenna outside, Antenna Inside which must be attached to the phone and the plug in? Now I understand the plug in and maybe even the outside antenna but somewhere along the line something must be wireless. to call it wireless!
button.
;)
