Wilson Electronics have a reputation for construction reliable high-performance amplifiers, especially in the in-car/truck market.
Included in this kit is: - Wilson 470002 dual band wireless amplifier - Wilson 301125 dual band magnetic mount antenna - 10' RG174 coaxial cable (exterior antenna to amplifier) - Velcro adapter and 6' adapter extension cable (for direct connect operation) - 6V/2A DC/DC Power Adapter 859913 (Car Charger) and instruction manual
The Mobile 3G amplifier in this kit is the Wilson 460002 wireless 50dB dual band amplifier. This amplifier allows you to improve your cellular signal wirelessly, covering an area up to 3-5 feet away from the antennas. The amplifier is dual band, working on both the 800MHz and 1900MHz frequencies. It can therefore be used with all US carriers (inc. AT&T, Sprint, Verizon, T-mobile etc) except Nextel.
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.
The external antenna included in this kit is the Wilson 301103 12" magnetic mount antenna. This antenna feature 5-6dB of gain, and has the highest power of any vehicle antenna on our site. The antenna is designed to mount easily on the metal roof of your car/RV, and is spring mounted to reduce impact damage.
The interior antenna included in this kit is a low profile antenna that will rebroadcast the amplified cell signals throughout your car or truck. This amplifier also comes with the option of attaching directly to your mobile phone through a wired connection and Velcro attachment. When used in this way as a 'direct connect' amplifier it may prove more reliable as the antenna is contiguous to your phone.The amplifier is powered through your cigarette lighter socket with the aid of the supplied power adapter.
Allows multiple phones and data cards to be used simultaneously
Supports CDMA, TDMA, GSM and AMPS, in addition to 1x and 3x data protocols such as HSDPA, EVDO and EDGE
Up to 3 watts maximum output power
Power control logic ensures maximum output power is within cellular standards
Requires no physical connection to cell phone or data card
Provides high signal-to-noise ratio
protects cell sites from harmful interference
Dual band - Cellular and PCS
FCC and IC type accepted
Part Number - 460102
Frequency - BAND 5 850 MHz / BAND 251 1900 MHz
Max Gain - 50 dB
Power Requirements -6 V,0.5A - 1.5 A (Subject to uplink Power)
Connectors - SMA Female
Dimensions - 6.2 x 3.6 x 1.3 (inches) / 15.7 x 9.1 x 3.3(cm)